Moving a Power Point in Perth: Relocating Outlets Safely
Moving a power point is a common request during renovations and reshuffles, when an outlet ends up behind new furniture, a fridge, or a wall-mounted TV. Moving a power point is licensed electrical work, not a DIY job. Here is when it makes sense, what is involved, and why an electrician is needed.
Why move a power point?
There are lots of reasons for moving a power point: a kitchen or bathroom renovation changes the layout, a new fridge or oven needs the outlet elsewhere, or a wall-mounted TV needs power hidden behind it. Moving a power point puts the outlet where it is actually useful, rather than where it happened to be.
6 reasons for moving a power point
- A renovation changes the room layout
- An outlet is hidden behind furniture or an appliance
- Wall-mounting a TV and hiding the cables
- A kitchen or bathroom redesign
- An awkward or unsafe outlet location
- Adding a new bench, island or built-in
What is involved
Moving a power point usually means running new cable to the new position, patching the old spot, and making good the wall. Depending on wall type and access, this can be simple or more involved. An electrician assesses the route and gives you a clear idea of the work before starting, so there are no surprises.
Do it during renovations
The best time for moving a power point is during a renovation, when walls may be open or are being patched and painted anyway. It is far cheaper and tidier to move outlets then than to chase cabling through finished walls later. If you are planning any work, factor the outlets in early.
Patching and making good
A neat job includes making good the old outlet location, whether that means patching plaster or fitting a blank plate. A good electrician leaves the wall tidy, not with a hole where the old power point was. Discuss finishing when you book, so you know what is included in moving a power point.
Can it just be extended?
Sometimes people ask if an outlet can just be extended with an internal lead instead of moving a power point properly. That is not a safe or compliant solution. Moving the outlet, with new cabling to the right spot, is the correct way, and it leaves you with a safe, permanent result.
New outlets while you are at it
Since the wall is already being worked on, moving a power point is a good moment to add extra outlets or USB points where you will need them. Doing it together saves a second visit and makes the most of the disruption, leaving the room better set up than before.
Kitchens and appliances
Kitchen makeovers are a frequent reason, a new island needs power, the fridge or microwave moves, or the rangehood shifts. Because kitchens have heavy, dedicated circuits, getting the outlets in the right place matters even more, and it is best planned with the rest of the kitchen work.
Cost and what to expect
The cost depends on the distance, the wall type, and how much patching is needed. A short move in an accessible wall is quick; a longer run or a brick wall takes more. An electrician can give you a clear quote once they have seen the spot.
Why use a licensed electrician
Moving a power point means new wiring and connections, which is licensed work in WA. A licensed electrician relocates the outlet safely, makes good the old spot, and certifies the work. The state’s Building and Energy sets the standards involved.
Need a power point moved in your Perth home?
ACS Electrical relocates outlets across the metro. Explore our power point installation service, USB power points guide or electrical maintenance and repairs service. Call 0419 967 838.
Professional electrical services for homes & businesses. We ensure safety & compliance.
Electrician Near Me
Emergency Electrician
Near Me Electrician
Book Your Electrician Now
Get A Free Electrical Quote
Switchboard Upgrades
Local electrician Perth WA
Same day service for homes and businesses call now
Joondalup, Wanneroo, Stirling, Balcatta, Carine, Beldon, Connolly, Edgewater, Currambine, Kingsley, Kinross, Chittering, Lancelin, BIndoon, Baldivis, Melville
Phone: 0419 967 838
Email: admin@acselec.com.au