Skip to main content

ACS Electrical

Aircon Installation Day in Perth: What to Expect

Aircon installation day is straightforward when you know what is coming, but many people are unsure how long it takes or what they need to do. Aircon installation day usually runs to a familiar pattern. Here is what to expect and how to prepare your Perth home.

How long does it take?
A single split system is often done in a day, sometimes half a day if the run is simple. A multi split or ducted system takes longer, often several days. Your installer should tell you the expected time when they quote, so aircon installation day fits around your schedule without surprises.

6 things to expect on aircon installation day

  • The installers confirm the agreed unit positions
  • Core drilling through the wall for the pipe run
  • Mounting the indoor and outdoor units
  • Connecting refrigerant pipes and electrical supply
  • Vacuuming, charging and testing the system
  • A demonstration of the controls before they leave

Confirming the positions
The first thing on aircon installation day is confirming where the units go. Even if it was discussed at quoting, the installers will check the indoor and outdoor positions with you before drilling. It is your last chance to raise any concerns about airflow, looks or noise, so speak up then.

The messy part
Core drilling through the wall for the pipes creates some dust and noise, which is the messiest part of aircon installation day. Good installers use drop sheets and clean up after themselves. It is short-lived, but worth knowing about, especially if you work from home or have young children napping.

Testing and commissioning
Once the units are mounted and connected, the system is vacuumed, charged and tested. This step matters, it is what makes the system run properly and last. A rushed commissioning causes problems later, so it is a good sign when installers take their time over this part of the job.

How to prepare
You can help aircon installation day run smoothly: clear furniture and belongings away from where the units will go, make sure there is access to the outdoor spot and the switchboard, and keep pets out of the work area. A little preparation saves time and protects your things.

Before they leave
At the end of aircon installation day, the installers should run the system, show you the controls and remote, and explain basic maintenance like cleaning the filters. It is worth asking any questions then. You should also get your paperwork, warranty details and the electrical certificate for the work.

Do you need to be home?
Someone should be there to confirm the positions at the start and to be shown the controls at the end. You do not need to hover all day, but being contactable helps if a question comes up, since small decisions about routing or brackets sometimes need your call.

What can slow things down
Difficult wall types, tight roof access, a long pipe run, or unexpected switchboard work can all add time. A good installer flags these when quoting, so the day runs to plan. Surprises are rarer when the site has been properly assessed beforehand.

After the install
Once it is running, keep the filters clean and the outdoor unit clear, and book a service before the following summer. A new system needs little attention early on, but starting good habits keeps it efficient and protects the warranty over its life.

Why use a licensed installer
Aircon installation day involves refrigeration and electrical work that must be done and certified correctly. A licensed installer does the job to standard and leaves you with the right paperwork. The state’s Building and Energy sets the electrical standards involved.

Booking an aircon installation in Perth?

ACS Electrical installs across the metro. Explore our split system air conditioning service, split system placement guide or air conditioning installation cost guide. Call 0419 967 838.

Professional electrical services for homes & businesses. We ensure safety & compliance.
Electrician Near Me
Emergency Electrician
Near Me Electrician

Book Your Electrician Now

Get A Free Electrical Quote

Switchboard Upgrades

Local electrician Perth WA
Same day service for homes and businesses call now

Joondalup, Wanneroo, Stirling, Balcatta, Carine, Beldon, Connolly, Edgewater, Currambine, Kingsley, Kinross, Chittering, Lancelin, BIndoon, Baldivis, Melville

Phone: 0419 967 838
Email: admin@acselec.com.au