Test & Tag Compliance · Northern Suburbs PerthKeep Every Appliance Tested, Tagged & Compliant. Powered.
ACS Electrical provides AS/NZS 3760:2022 compliant test and tag, RCD testing and emergency lighting checks for businesses across Perth's northern suburbs from Joondalup offices to Wangara warehouses. One licensed team, digital compliance reports, and retest reminders so nothing lapses.
Test & Tag Compliance Rarely Gets Attention Until It's Overdue
Most northern suburbs businesses only think about test and tag when an auditor, insurer or new landlord asks for the paperwork. By then it's usually one of these four problems.
Tags Have Quietly Expired
Office kitchens, workshops and warehouses in Wangara and Malaga often run months past their retest date before anyone notices a tag has lapsed.
RCDs Never Get Checked
Safety switches are easy to forget because they sit inside the switchboard — but WHS regulations require regular push-button and injection testing all the same.
No Paperwork On Audit Day
A WorkSafe inspection or insurance renewal asks for the test logbook, and there isn't one — or it's scattered across old emails and previous contractors.
Wrong Retest Cycle Applied
A Joondalup office and a Wangara workshop don't share the same testing interval — using the wrong cycle leaves a business non-compliant without realising it.
How Often Does Your Site Actually Need Testing?
AS/NZS 3760:2022 sets the retest interval by environment, not by guesswork. Pick your business type and rough appliance count to see where you likely sit.
Electrical Compliance Testing For Northern Suburbs Businesses
One licensed team for appliance testing, RCDs and emergency lighting — so compliance sits with one contractor, not three.
Single & Three-Phase Appliance Testing
Visual inspection, earth resistance, insulation resistance and leakage current testing on everything from laptops and power boards to three-phase kitchen and workshop equipment.
See how we approach this
RCD & Safety Switch Testing
Push-button and trip-time injection testing on residual current devices, on the 3, 6 or 12-month cycle your site's environment requires under WHS regulations.
See how we approach this
Emergency & Exit Lighting Testing
Biannual discharge testing to AS/NZS 2293.1, confirming your exit signs and emergency lighting hold the required 90-minute backup when the power actually drops.
See how we approach this
Test & Tag Compliance Tagging
Every tested item is clearly tagged with pass/fail status and next test date to AS/NZS 3760:2022 — dated, colour-coded and ready for a walk-through audit.
See how we approach this
Microwave Leakage Testing
AS/NZS 60335.2.25 leakage testing for staff kitchen microwaves — worn door seals can let radiation escape long before an appliance looks or acts faulty.
See how we approach this
Scheduled Compliance Plans
Retest reminders timed to your renewal dates, with a digital logbook emailed within 24 hours and kept on file — ready whenever an insurer or auditor asks.
See how we approach thisBased In Joondalup. Testing Right Across The Northern Corridor.
Being local means we're already in the area — faster scheduling for a Wangara warehouse test cycle or a Joondalup office visit than a contractor driving up from the city.
Check My Suburb →
The Team Northern Suburbs Businesses Trust With Compliance
A licensed, locally-owned contractor based in Joondalup — not the cheapest quote in the inbox, but the crew that tests properly, tags clearly, and leaves your paperwork in order.
Fully licensed — EC 15832
Every test carried out by a qualified, licensed electrician — not an unqualified subcontractor with a PAT tester.
Correct retest cycles
We apply the AS/NZS 3760 interval that actually matches your environment, not a blanket 12-month default.
Fixed, upfront pricing
A written quote before we start — priced on item count, not padded out once we're on site.
Paperwork that holds up
Digital test logbook and compliance certificate, filed and ready for landlords, insurers or a WorkSafe audit.
From First Call To Compliance Certificate
A clear, four-step process built around getting your business fully tagged with minimal disruption to trade.
Call Or Request A Quote
Tell us your industry and rough item count. We'll give you an indicative retest cycle and price on the spot.
Visit Scheduled Around You
After-hours or staged visits where possible, so staff, customers and daily trade aren't disrupted.
Test, Tag & Log Every Item
Visual inspection, PAT testing and RCD checks against AS/NZS 3760, with every item clearly tagged pass or fail.
Report & Retest Reminder
Digital logbook and compliance certificate emailed within 24 hours, plus a reminder before your next test is due.
Test & Tag Jobs Across The Northern Suburbs
From office test and tag in Joondalup to warehouse RCD testing in Wangara — the everyday compliance work northern suburbs businesses trust us with.
Northern Suburbs Businesses Who Got It Sorted
Rated 5 stars on Google, with commercial clients consistently mentioning fast, tidy, properly documented test and tag visits.
Test & Tag Questions We Get Asked
Straight answers — call us on 0419 967 838 for anything specific to your site.
Yes. Under the Occupational Safety and Health Regulations 1996, anyone in control of a workplace must ensure portable electrical equipment and RCDs are inspected, tested and maintained by a competent person. It's regulated in WA by the Department of Mines, Industry Regulation and Safety.
It depends on the environment under AS/NZS 3760:2022 — typically 6 months for warehouses and commercial kitchens, 12 months for offices and general commercial spaces, and 3 months for construction or demolition sites. We confirm the right cycle at your site assessment.
A visual inspection followed by PAT testing for earth resistance, insulation resistance and leakage current on every plug-in item, plus RCD safety switch testing on request. Passed items are tagged with the retest date; failed items get a danger/out-of-service tag and you're notified directly.
Yes — a digital test logbook is emailed within 24 hours of every visit, and we keep a copy on file too. If you'd like, we'll also send a reminder ahead of your next retest date so nothing lapses.
Yes — most sites bundle appliance test and tag with RCD injection testing and emergency/exit light discharge testing into a single scheduled visit, so it's one contractor and one invoice instead of three.
Joondalup, Wangara, Malaga, Wanneroo, Clarkson, Currambine, Osborne Park, Balcatta, Neerabup and the surrounding northern corridor. Not sure if you're covered? Just call and ask.
Don't Let Overdue Test & Tag Put Your Business At Risk.
Tags expired, RCDs never tested, or no logbook to show an auditor — ACS Electrical can assess your site, quote it upfront, and get you fully compliant.
Book Your Northern Suburbs Test & Tag
Send a few details about your site and we'll come back with a fixed-price quote and next available booking. Prefer to talk it through? Call us directly.